iDeal LR-10K-TLPAD 10,000-lb Commercial Low-Rise Pad Lift, Surface Mount

Description

The iDeal LR-10K-TLPAD is a 10,000-lb commercial low-rise pad lift built for high-throughput tire and wheel service. The platform measures 91 inches long and 88-5/8 inches wide, giving full-size pickups, SUVs, and wide sport cars room to drive on without chasing a perfect approach. Minimum platform height is 4-1/4 inches for tight-clearance vehicles, with a 22-1/2-inch maximum rise — extendable to 30-3/4 inches with the included tall height adapters.

The standard 115V power unit lifts a full load in 60 seconds. An optional 220V unit cuts that to 36 seconds for shops running back-to-back service. Both configurations use dual hydraulic cylinders for balanced lifting and three locking height positions (13.5″, 17.25″, 21.5″). Latch release handles on both sides let one technician work the lift from either approach without crossing the bay.

Construction is commercial-grade throughout: integrated outer frame and diamond-plate ramps for drive-on and drive-off clearance, durable rubber platform contact pads, durable powder-coat finish, and a power-unit pedestal stand included in the box. Hydraulic hoses route to either side of the lift and are protected by two 55-inch metal hose covers.

Features

• 10,000-lb capacity, low-rise commercial-grade pad lift
• Surface-mount install — no recess required
• Integrated outer frame and ramps for drive-on and drive-off access
• Platform sized for wide vehicles (88-5/8″ outer width)
• Latch release handles on each side of the lift
• Dual hydraulic lift cylinders for balanced lifting
• Diamond-plate approach ramps
• Durable rubber platform contact pads
• Three locking height positions: 13.5″, 17.25″, 21.5″
• Two 55″-long metal hose covers included
• Four heavy-duty multi-position height adapters and four 1.5″ rubber pads included
• Power-unit pedestal stand included
• Durable powder-coat finish
• Optional 220V power unit available for faster lift speed

Specifications

What’s Included

• LR-10K-TLPAD pad lift platform with integrated outer frame and ramps
• Standard 115V power unit (220V optional)
• Power-unit pedestal stand
• Four heavy-duty multi-position height adapters
• Four 1.5″ rubber pads
• Two 55″-long metal hose covers

Shipping & Logistics

The LR-10K-TLPAD ships fully crated via freight at a 1,262-lb shipping weight.

Documents

• LR-10K-TLPAD Product Manual (PDF)
• LR-10K-TLPAD Spec Flier (PDF)