HD Ramps 7’10” EZ Traction Aluminum Plate End Car Trailer Ramps 5,000 lb. Capacity
$566.99
7′ EZ Traction Car Trailer Ramps by HD Ramps
Loading a low-clearance car, sports vehicle, or classic onto a flat trailer shouldn’t risk scraping your bumper or losing grip mid-ramp. Steep angles, slick surfaces, and ramps that shift under your tires turn a simple load-up into a stressful, damage-prone process.
The 7′ 10″ EZ Traction Plate End Car Trailer Ramps by HD Ramps fix that with American-made aluminum construction, a 5,000 lb per axle capacity, an EZ Traction punch plate surface, and a knife-foot base that gives low-profile vehicles a smooth transition from ground to trailer.
The System
Everything you need to safely load your vehicle onto a flat trailer deck.
- Two aluminum plate end car trailer ramps
- Two safety straps for securing ramps to the trailer
- EZ Traction punch plate loading surface
- Sold as a pair — complete, ready-to-use solution
Made For:
Designed for car haulers, auto enthusiasts, restoration shops, and rental operators, these ramps are built to handle the demands of loading low-clearance and standard vehicles onto flat trailer decks with confidence and stability.
Their long length and knife-foot base make them a great fit for sports cars, sedans, classics, and other low-profile vehicles that need a gradual approach angle to avoid scraping during loading.
Works Well With:
- Low-clearance sports cars and sedans
- Classic and restoration project vehicles
- Flat car trailers and open haulers
- Auto transport and dealer operations
- Track day and show car loading
Features:
- Made in the USA — high-strength aluminum
- 5,000 lbs per axle — 10,000 lbs total capacity
- Built for 16″ to 24″ trailer deck heights
- 7′ 10″ length for a low, gradual loading angle
- 15″ wide surface fits standard car tires
- Plate-style end lays flat on the trailer deck
- Two safety straps included for secure attachment
- EZ Traction punch plate surface for all-weather grip
- Knife-foot base for smooth, low-clearance transitions
- Sold in pairs — ready right out of the box
Heavy-Duty Capacity Lightweight Design
Loading a car onto a trailer shouldn’t mean wrestling with heavy steel ramps every time. At 40 lbs each, these plate end ramps are light enough for one person to position — but strong enough to safely support the axle loads of cars, light trucks, and project vehicles.
The high-strength aluminum gives you the strength you need without the extra weight that wears you out by the third load of the day. It also resists rust, so your ramps stay reliable through years of outdoor use and storage.
Plates That Hold
The plate-style ends lay flat across your trailer deck and lock down with the two included safety straps, keeping the ramps locked in position while you drive your vehicle up. There’s no kicking, sliding, or shifting once they’re strapped down.
It’s a simple, secure setup that works on nearly any flat trailer deck — and it gives you confidence that your ramps will stay exactly where you put them from the first tire to the last.
Traction You Can Trust
The EZ Traction punch plate surface uses a perforated design that grips your tires from every direction, giving you consistent control whether you’re loading on a dry day or in pouring rain. The traction stays strong no matter what the weather throws at you.
Combined with the knife-foot base for a smooth ground transition, the punch plate surface gives you a reliable loading path that protects low-clearance vehicles and keeps your wheels rolling steadily up the ramp.
Ready to Load with Confidence?
Every car you load with the wrong ramps risks a scraped bumper, a stressful angle, or a slip you don’t want to think about. The 7′ 10″ EZ Traction Plate End Car Trailer Ramps by HD Ramps give you a smoother, safer way to load the vehicles you care about — American-made and built for the long haul.
Stop settling for ramps that put your vehicle at risk. Click the Add to Cart button now and put a proven car loading solution to work on your trailer today.
Specs
Specifications
| Length | 7′ 10″ |
| Width | 15″ |
| Height | 3″ |
| Maximum Capacity | 5,000 lbs. per axle |
| Weight | 40 lbs. per ramp |
| Minimum Height | 16″ |
| Maximum Height | 24″ |
| Material | Aluminum |
| Surface Type | Punch Plate |
| Foot Type | Knife |
| Attaching End | Plate |
Related products
ATD ATDTLTLFT Automotive Tilt Lift Portable Drill-Powered 7,000 lb Capacity
In stock
HD Ramps 16′ L x 18″ W Aluminum Hook End Car Trailer Ramps with 5,000 lb. Per Axle Capacity
In stock
HD Ramps 7′ 10″ L x 15″ W Aluminum Hook End Car Trailer Ramps Low-Profile 5,000 lb. Capacity
In stock
HD Ramps 7′ 6″ L x 15″ W Aluminum Car Trailer Ramps Hook End Knife Foot 7,000 lbs Per Axle
In stock
HD Ramps 8’x16″ Aluminum Ramps Double Pin-On Ends with 20,000 lbs Capacity
In stock
HD Ramps Aluminum Hook End Car Trailer Ramps 5’x15″ 5,000 lbs Capacity
In stock
HD Ramps Heavy Duty Aluminum Truck Service Ramps with 7,000 lbs Capacity per Axle
In stock
Rotary SPOA7 Movable Pad 2-Post Lift with 2 Ft. Extension 7,000 lb. Capacity
In stock
Reviews
Clear filtersThere are no reviews yet.