KATOOL KT-T160 & KT-B795L Tire Changer and Wheel Balancer Combo Heavy Duty 62″ Max Wheel Diameter

Katool KT-T160 Truck Tire Changer and KT-B795L Wheel Balancer Package

Commercial tire work is heavy in a way passenger work is not. A loaded truck assembly weighs more than a tech should lift, and a car machine will not take it anyway.

This package is sized for it. The KT-T160 is an electro-hydraulic truck changer for wheels to 62 in on 14–26 in rims, and the KT-B795L balancer takes assemblies to 330 lbs and lifts them onto the shaft itself with an integrated pneumatic lift. Both run on 220V.

Why Choose the KT-T160 and KT-B795L Package

Both machines are rated for commercial rubber, and both take the lifting off the tech.

• Integrated pneumatic lift on the balancer — a 330 lb assembly is raised onto the shaft by the machine, turning a two-person job into one.
• Electro-hydraulic changer to 62 in wheels — truck, bus, tractor and earth-moving tires on one machine.
• Both machines on 220V single phase — one supply spec to run for the whole commercial bay.
• Laser-guided balancing at ±1 g — passenger-car precision applied to commercial wheels.

What’s Included

• Katool KT-T160 electro-hydraulic truck tire changer
• Katool KT-B795L truck wheel balancer with integrated pneumatic lift
• Standard mounting and balancing tooling for both machines

Made For

Built for operations that service commercial rubber.

• Truck and bus tire shops
• Fleet maintenance centers
• Transportation and logistics operations
• Agricultural and equipment yards
• Car shops expanding into commercial work

Features

• 62 in (1,600 mm) max wheel diameter, 30 in width — commercial and off-road assemblies
• 14–26 in rim clamping with multifix system — the commercial rim board on one machine
• Electro-hydraulic operation at ≤130 bar — the force heavy assemblies need
• Dual motors: 1.5 kW pump, 2.2 kW gearbox — consistent power through the cycle
• 330 lb (150 kg) max wheel weight on the balancer — loaded commercial assemblies
• Integrated pneumatic wheel lift — no manual lifting onto the shaft
• Laser-guided balancing to ±1 g in about 8 seconds — commercial-size accuracy
• 13–24 in rim range, wheels to approx. 51 in on the balancer — broad commercial coverage

The KT-T160 Changer Side

The KT-T160 is an electro-hydraulic machine built for trucks, buses, tractors and earth-moving vehicles. Working pressure is up to 130 bar, and the force comes from two motors — a 1.5 kW (2.0 HP) pump and a 2.2 kW (3.0 HP) gearbox — so it keeps delivering through a full cycle rather than fading on the hard part.

The multifix clamping system covers 14–26 in rims, with wheels to 62 in diameter and 30 in wide. A powerful beak and disk bead-breaking system handles commercial beads without the improvisation those tires usually require.

Multifunctional controls let the operator work from several positions around the machine, which matters when the assembly is taller than they are. Low-voltage electrical components handle operator safety, and at 570 kg (1,257 lbs) the machine has the mass its job demands. Supply is 220V single phase.

The KT-B795L Balancer Side

The pneumatic lift is the reason this balancer belongs in a commercial bay. It raises the wheel off the floor and positions it on the shaft, so a 330 lb assembly that used to need two techs and a careful count becomes one operator’s job.

That changes the economics twice: throughput goes up, and the back injuries that come with manhandling commercial wheels stop being part of the process.

Laser-guided balancing resolves imbalance to within 1 gram on rims from 13 to 24 in, wheels up to about 51 in across and rim widths from 1.5 to 20 in. The cycle takes about 8 seconds at 180 rpm on a 0.55 kW motor and 220V single-phase power, running under 65 dB — quiet for a machine this size.

The Right Tire Changer and Balancer Combo for Your Shop

For a commercial tire bay in one order, this package is the pairing: an electro-hydraulic changer for 62 in wheels and a 330 lb balancer with an integrated pneumatic lift, both on 220V.

Don’t wait — scroll back up and click the orange Add to Cart button to get this tire changer and balancer combo on its way to your shop.

Specs

Technical Specifications