KATOOL KT-T835 & KT-B700 Tire Changer and Wheel Balancer Combo 41″ Max Diameter

Katool KT-T835 Wide-Clamp Tire Changer and KT-B700 Wheel Balancer Package

A 26-inch alloy on a lifted truck arrives, and the changer that handles everything else in the shop simply will not take it. The job goes down the road, and so does the customer.

This package extends the range. The KT-T835 clamps 13–26 in from outside and 14–28 in from inside, backed by a double side assist arm on a 582 lb frame, and the KT-B700 balances what comes off it to ±1 g in 7 seconds.

Why Choose the KT-T835 and KT-B700 Package

The clamping range is what puts oversized wheels back on your schedule.

• 13–26 in outside, 14–28 in inside clamping — large-diameter alloys that stop a standard changer are inside the range.
• Double side assist arm — holds the bead down on run-flats and stiff sidewalls so one tech can work the wheel.
• 582 lb frame at 6.1 r/min — mass and unhurried torque, which is what a big wheel needs.
• ±1 g balancing with on-screen weight guidance — consistent results whoever is on the machine.

What’s Included

• Katool KT-T835 rim-clamp tire changer with double side assist arm and bead blast seater head
• Katool KT-B700 digital wheel balancer
• Standard mounting and balancing tooling for both machines

Made For

Built for shops that see large-diameter wheels regularly.

• Truck and SUV tire specialists
• Custom wheel and lift shops
• Independent auto repair shops with a dedicated tire bay
• Fleet maintenance facilities
• Dealership service departments

Features

• 13–26 in outside, 14–28 in inside clamping — the widest rim range in the swing-arm line
• Double side assist arm — bead pressed and held from both sides during mount and dismount
• Bead blast seater head with post tank — one burst of stored air seats a stubborn bead
• 41 in (1,040 mm) max wheel diameter — oversized fitments included
• 2.0 HP (1.5 kW) turntable at 6.1 r/min — deliberate rotation for large, stiff tires
• 582 lb changer on Q235 / Q245 steel — the mass a big wheel demands
• ±1 g balancing accuracy, 7-second cycle — precise and quick
• On-screen weight placement guidance — the display shows where the weight belongs

The KT-T835 Changer Side

Clamping range is the KT-T835’s reason for existing. At 13–26 in from the outside and 14–28 in from the inside, it takes the large-diameter alloys that a 22-inch-limited changer has to turn away — and those are exactly the wheels attached to the highest-value tire jobs.

The double side assist arm presses and holds the bead from both sides while the turntable rotates, so a big stiff sidewall is controlled instead of wrestled, and the rim edge stays unmarked.

Rotation is 6.1 r/min from a 2.0 HP turntable — deliberately slower than a small-wheel machine, because a large tire needs time rather than speed. The frame is 582 lbs of Q235 and Q245 steel on 110V 60 Hz power and 0.8–1.0 MPa shop air, with a bead blast seater head fed by a post tank.

The KT-B700 Balancer Side

The KT-B700 spins at 180 rpm and returns a reading in about 7 seconds, accurate to ±1 gram, calculating static and dynamic imbalance automatically so both planes are handled in one operation.

On-screen weight placement guidance keeps results consistent. The display shows where the correction goes instead of leaving it to judgment, which matters most on wide wheels where the two planes sit far apart.

It handles rims to 30 in, wheels to 34.64 in overall and assemblies to 143 lbs, on a 0.25 kW motor and 120V single-phase power.

The Right Tire Changer and Balancer Combo for Your Shop

To stop turning away large-diameter wheels, this package is the pairing: a 13–26 in clamping changer with a double side assist arm and a ±1 g, 7-second balancer.

Don’t wait — scroll back up and click the orange Add to Cart button to get this tire changer and balancer combo on its way to your shop.

Specs

Technical Specifications