KATOOL KT-TV910 Hydraulic Truck Tire Changer Electro-Hydraulic with 63″ Max Wheel Diameter, 42″ Rim Clamp, 3306 lb Capacity, 220V Power

Katool KT-TV910 Hydraulic Truck Tire Changer with 14–42 in Rim Clamping

Commercial tires do not negotiate. Bus, truck, and earth-mover rubber needs hydraulic force and a clamping range no passenger-car machine can offer.

The Katool KT-TV910 hydraulic truck tire changer delivers both: 14–42 in outer rim clamping, wheels up to 63 in in diameter, and tires weighing as much as 3,306 lbs, all driven by a 4.0 HP electro-hydraulic system.

Why Choose the KT-TV910

The KT-TV910 is the heavy hydraulic machine — commercial capacity on a single-phase 220V supply.

• 3,306 lb max tire weight — loaded truck, bus, and tractor assemblies are inside the rating.
• 14–42 in outer rim clamping — from light-truck rims to large commercial sizes on one machine.
• ≤ 130 bar working pressure — a 3.0 kW hydraulic motor supplies the force that hand tools cannot.
• 220V single-phase power — commercial capability without a 3-phase service upgrade.

Made For

Built for the heavy end of commercial tire work.

• Truck and bus tire shops
• Fleet maintenance operations
• Agricultural and earth-moving equipment service
• Commercial roadside-service bases
• Yards servicing mixed heavy vehicle types

Features

• 14–42 in outer rim clamping — the commercial rim range
• 63 in max wheel diameter — tall truck and off-road rubber
• 31 in max wheel width — wide commercial fitments
• 3,306 lb max tire weight — heavy assemblies handled by machine
• ≤ 130 bar working pressure — hydraulic force where it counts
• 3.0 kW (4.0 HP) hydraulic motor — steady power through the cycle
• 220V single-phase, 60 Hz — no 3-phase service required
• Under 70 dB(A) noise level — manageable in an enclosed bay

Hydraulic Force for Commercial Rubber

A 3.0 kW hydraulic motor working at up to 130 bar drives the clamping and bead breaking. Beads rust-welded onto a steel truck rim separate in a controlled press rather than a violent pop, which protects both the rim and the tech.

With a 3,306 lb tire rating and a 1,256 lb machine weight beneath it, the KT-TV910 stays planted while handling assemblies that no one is lifting by hand.

Sized for the Whole Commercial Board

Outer rim clamping from 14 to 42 in covers light-truck wheels through large commercial rims, with room for tires up to 63 in tall and 31 in wide in the working envelope.

Power is 220V single-phase at 60 Hz — heavy-truck capability without bringing 3-phase service into the building. Noise stays under 70 dB(A), which matters when the machine runs inside a closed shop all day.

The Right Tire Changer for Your Shop

For truck, bus, and tractor tires, the KT-TV910 brings the force: 14–42 in clamping, 3,306 lbs of tire capacity, and hydraulic power on a single-phase line.

Don’t wait — scroll back up and click the orange Add to Cart button to get this tire changer on its way to your shop.

Specs

Technical Specifications