KATOOL KT-X95 Full Rise Scissor Lift – Flush-Mount 8000 lb Capacity Lift with CE Certification and Space-Saving Design

Katool KT-X95 8,000 lb Flush-Mount Full Rise Car Scissor Lift

A full-height lift usually means columns, arms, and a bay you can never use for anything else. When the lift is down, the space should give itself back.

The Katool KT-X95 full rise scissor lift disappears into the floor when lowered — the flush-mount design leaves no columns and no trip hazard. Raised, it puts 8,000 lbs at 72.3 in in 50 seconds or less.

Why Choose the KT-X95

The KT-X95 delivers full-rise, stand-under access from a lift that vanishes into the floor between jobs.

• Flush-mount design — platforms sit level with the floor when lowered; the bay stays fully usable.
• 72.3 in max lifting height — true stand-under access for exhaust, driveline, and underbody work.
• ≤ 50 second rise — full height fast, on a 2.2 kW power unit.
• Pneumatic safety lock release — with a height limit switch and 24V safe control system.

What’s Included

• Katool KT-X95 full rise scissor lift
• Composite rubber lifting blocks

Made For

Built for bays where floor space is too valuable to fence off with columns.

• Shops wanting full-rise access without post lifts
• Showrooms and detail studios keeping a clean floor
• Home garages where the bay must stay multi-purpose
• Underbody, exhaust, and driveline service
• Bays too narrow for two columns and swing arms

Features

• 8,000 lb capacity — sedans, SUVs, and light trucks
• 72.3 in max lifting height — walk-under working clearance
• Flush-mount installation — level with the floor when lowered
• ≤ 50 sec lifting time — quick to full height
• Pneumatic safety lock release — deliberate, air-actuated lowering
• 24V safe control with height limit switch — low-voltage, protected travel
• 2.2 kW motor, 110V or 220V — matches the power you have
• CE certified — 115% dynamic / 150% static load tested

A Full-Rise Lift That Gives the Floor Back

Recessed into the slab, the KT-X95’s platforms sit flush with the floor — cars park over it, carts roll across it, and nothing interrupts the bay. Raise it and the same footprint becomes a 72.3 in full-rise lift.

With no columns, there is nothing beside the doors and nothing to drive between. The 58.9 in platforms with composite rubber blocks meet the vehicle at its lift points.

Air-Locked Safety at Height

Mechanical locks carry the load at working height, released pneumatically on a 6–8 kgf/cm² air supply — lowering is a deliberate, two-step action. The height limit switch stops travel at maximum extension.

The 24V control system keeps the operator on safe voltage, and the 20 MPa rated hydraulic circuit is driven by a 2.2 kW motor on either 110V or 220V single-phase power. The structure is Q235/Q245 steel, CE tested to 115% dynamic and 150% static load.

The Right Scissor Lift for Your Shop

If you want full-rise lifting and a completely clear bay between jobs, the KT-X95 is built for it: 8,000 lbs, 72.3 in of rise, flush with the floor when the work is done.

Don’t wait — scroll back up and click the orange Add to Cart button to get this lift on its way to your shop.

Specs

Technical Specifications

Manual

Owner’s Manual

Download the Katool KT-X95 owner’s manual for installation instructions, maintenance guidelines, and safety information. Download Manual