KATOOL KT-X99 Hydraulic Scissor Lift 7,700 lbs Capacity 76″ Lift Height

Katool KT-X99 7,700 lb Full Rise Hydraulic Car Scissor Lift

Full stand-under height usually means two columns bolted into the bay — steel beside every door, and a footprint the floor never gets back.

The Katool KT-X99 hydraulic scissor lift reaches a full 76 in of lift height with no columns at all. It carries 7,700 lbs on a wide 48 in platform, rising in roughly 30–40 seconds.

Why Choose the KT-X99

The KT-X99 is the column-free full rise: 76 in of working height from a footprint that sits between the wheels.

• 76 in max lift height — genuine stand-under clearance for exhaust, driveline, and underbody work.
• No columns, no arms — doors open freely and nothing blocks the walk-around.
• 48 in wide platform — broad, anti-slip contact under the vehicle.
• Multi-position mechanical safety locks — the load rests on steel at working height.

Made For

Built for full-height work in bays that cannot take a post lift.

• Underbody, exhaust, and driveline service
• Garages and warehouses with flexible floor plans
• Detail and undercoating operations
• Home garages wanting stand-under height without columns
• Shops adding a compact full-rise station

Features

• 7,700 lb capacity — sedans, SUVs, and light trucks
• 76 in max lift height — walk-under working clearance
• 4.5 in minimum height — low drive-over profile
• Approx. 30–40 sec raise — quick to full height
• 48 in wide anti-slip platform — 1.25 in thick deck
• Multi-position mechanical locks — steel under the load at every stage
• 2.0 HP electric-hydraulic unit — 110V/220V operation
• High-strength welded steel construction — approx. 1,250 lbs of structure

Full Height, Zero Columns

At 76 in of rise, the KT-X99 puts the underbody at head height — real standing room for exhaust runs, driveshafts, and fuel systems. The whole mechanism folds into a 78 x 52 in footprint under the car.

With nothing beside the vehicle, doors swing free and the walk-around stays clear. The 48 in wide platform with anti-slip texture spreads the load across the underbody contact points.

Hydraulics with Steel Backup

The 2.0 HP electric-hydraulic unit works at a 2,200 psi operating pressure, raising the platform in roughly 30–40 seconds. Multi-position mechanical safety locks engage on the way up.

At working height the load sits on the locks, not on hydraulic pressure — lowering is a deliberate release. The welded steel structure is CE certified.

The Right Scissor Lift for Your Shop

For stand-under height in a bay that stays open, the KT-X99 is the pick: 7,700 lbs, 76 in of rise, and no columns anywhere.

Don’t wait — scroll back up and click the orange Add to Cart button to get this lift on its way to your shop.

Specs

Technical Specifications

Manual

Owner’s Manual

Download the Katool KT-X99 owner’s manual for installation instructions, maintenance guidelines, and safety information. Download Manual