KATOOL KT-310 Auto Body Frame Machine Compact Dual-Function Hydraulic Bench with 6-Ton Pulling Power

Katool KT-310 Compact Auto Body Frame Machine and Lifting Bench

Structural work goes down the road for one reason in most shops: a full-length frame rack wants twenty feet of floor that is already earning money.

The Katool KT-310 is a 130.8 in bench that lifts and pulls. It raises the car from a 4.3 in drive-on height to 67 in on a 7,000 lb CE-certified platform, then puts 60 kN — 6 tons — on the damage through a tower with a full 360° working range.

Why Choose the KT-310

It is a lift and a frame machine on the same footprint, which is what makes structural repair fit a small shop.

• Dual function: hydraulic lift and pulling bench — one 130.8 x 34.5 in footprint does the work of two pieces of equipment.
• 60 kN (6 ton) pulling tower with 360° range — the pull angle comes to the damage instead of the car being repositioned.
• 4.3 in drive-on, 67 in top height — the car rolls straight on, then comes up to a working height that saves the tech’s back.
• Quick-fix clamps, two screws each — the vehicle is anchored in minutes rather than the first half hour of the job.

What’s Included

• Main frame platform
• Pulling tower
• Quick-fix clamps
• Four rotating lifting arms
• Bench supporter
• Hydraulic power unit with control panel

Made For

Built for shops adding structural repair without adding a building.

• Small and mid-size collision repair shops
• General repair shops moving into structural work
• Restoration and custom builders
• Fleet and municipal maintenance facilities
• Dealership body departments

Features

• 60 kN (13,488 lbf) pulling tower — 6 tons for small and mid-size structural correction
• 360° tower working range — any pull angle without moving the vehicle
• 7,000 lb (3,175 kg) CE-certified load capacity — cars, crossovers and light trucks
• 4.3 to 67 in height range, 9 locking grades — set the working height and lock it
• Four lifting arms with 180° rotation — pick-up points positioned to the vehicle
• Dual hydraulic cylinder system — balanced lift across the platform
• Quick-fix two-screw clamp jaws — secure anchoring, fast setup
• Q235 / Q245 steel, 220V supply — rated structural steel on standard shop power

Two Machines on One Footprint

The KT-310 is 130.8 in long and 34.5 in wide. That is roughly a parking space, not a bay, and it is the whole reason a shop with three bays can offer structural repair at all.

The dual-cylinder hydraulic system lifts the vehicle on four rotating arms to any of nine locked height grades between 4.3 and 67 in. Between structural jobs that same bench is simply a lift, so the floor space is never idle waiting for collision work to arrive.

Drive-on height is 4.3 in, so a car with normal ride height rolls on without ramps or a jack. Load capacity is 7,000 lbs, CE certified, which covers passenger cars, crossovers and light trucks.

The Tower Goes to the Damage

The pulling tower develops 60 kN — 13,488 lbf, about 6 tons — and moves through a full 360° around the platform. Damage on the left rear gets a pull from the left rear; nobody unclamps the car to chase an angle.

Setup speed comes from the clamp design. The quick-fix jaws tighten with two screws, so the vehicle goes from on the bench to properly anchored in minutes. On a job priced by the hour, that time is margin.

The frame itself is Q235 and Q245 structural steel, and the bench supporter carries the load path during a pull so the platform is not doing the work alone. Power is a standard 220V supply feeding the hydraulic unit and its control panel.

The Right Frame Machine for Your Shop

To take structural work in a shop that does not have a frame bay, the KT-310 is the machine: a 130.8 in dual-function bench, a 60 kN 360° tower, and a 7,000 lb CE-certified platform.

Don’t wait — scroll back up and click the orange Add to Cart button to get this frame machine on its way to your shop.

Specs

Technical Specifications