KATOOL KT-X85 Mid-Rise Scissor Lift Electric 110V, Mobile with 8000 lb Capacity

Katool KT-X85 8,000 lb Portable Mid Rise Car Scissor Lift

Not every garage can give up a bay to a fixed lift — and not every job needs one. Wheels, brakes, and rockers just need the car at waist height, wherever there is room to work.

The Katool KT-X85 mid rise scissor lift raises 8,000 lbs to 40.15 in with an electric safety release, and the included portable mobile kit lets you move the whole lift to the work.

Why Choose the KT-X85

The KT-X85 pairs full 8,000 lb capacity with an electric release and a mobile kit in the box — a flexible lifting station, not a fixed installation.

• Electric safety release — locks disengage from the control unit, no separate air supply needed.
• Portable mobile kit included — roll the lift where the job is, park it against the wall after.
• 4.25 in minimum height — low-profile platforms slide under lowered vehicles.
• 24V safe lock control — low-voltage controls with a height limit switch at full extension.

What’s Included

• Katool KT-X85 mid rise scissor lift
• Composite rubber lifting blocks
• Portable mobile kit

Made For

Built for garages that need lifting power without a permanent footprint.

• Home garages that still park cars daily
• Tire, brake, and suspension service
• Detail shops working lower panels
• Shops adding a flexible overflow lifting station
• Low-ceiling spaces where post lifts will not fit

Features

• 8,000 lb capacity — sedans, SUVs, and light trucks
• 40.15 in max lifting height — waist-height working access
• 4.25 in minimum height — slides under most cars
• Electric safety release — no air line required for lowering
• Multi-position mechanical locks — the load rests on steel
• 110V or 220V single-phase motor — matches the power you have
• Self-lubricated bushings and bearings — less maintenance over the years
• CE certified — 115% dynamic / 150% static load tested

Portable Capacity, Real Lifting

The included mobile kit turns 1,213 lbs of lift into something one person can reposition. Set it where the job is, lift, work, lower, and roll it out of the way — the garage floor goes back to being a garage floor.

The 57 in platforms carry composite rubber lifting blocks that meet the vehicle at its lift points, protecting pinch welds and rockers while spreading the load.

Electric Release and Steel Locks

Mechanical locks engage at multiple positions as the lift rises, so the car sits on steel at working height. The electric safety release disengages them from the 24V control unit — a deliberate action, not a bump.

A height limit switch stops travel at maximum safe extension, and the reinforced scissor structure is CE tested to 115% dynamic and 150% static load.

The Right Scissor Lift for Your Garage

For real capacity that packs away after the job, the KT-X85 is the practical pick: 8,000 lbs, electric release, and the mobile kit already in the crate.

Don’t wait — scroll back up and click the orange Add to Cart button to get this lift on its way to your garage.

Specs

Technical Specifications

Manual

Owner’s Manual

Download the Katool KT-X85 owner’s manual for installation instructions, maintenance guidelines, and safety information. Download Manual