Rotary SPO10 Shockwave 2-Post Lift 10,000 lb. Capacity

10,000 lb Rotary SPO10 Symmetric Two-Post Lift, Shockwave Equipped

A busy bay loses time twice on every job. Once waiting for the lift to crawl up, and again waiting for it to come back down. On a standard-powered lift, that is minutes lost on every car, all day long.

The Rotary SPO10 is a symmetric two-post lift rated for 10,000 lbs, engineered for cars and light trucks and built on Rotary’s original Double-S columns. This configuration comes Shockwave equipped: DC battery power with an onboard 110V charger that raises and lowers the vehicle at twice the speed of a standard-powered lift.

What’s Included

• SPO10 symmetric two-post lift with original Double-S columns
• DC Shockwave power unit with onboard 110V charger
• Standard 2-stage arms with exclusive three-position flip-up FA adapters

Made For

Rotary builds the SPO10 for four kinds of shop.

• Auto fleets servicing their own vehicles in-house
• Auto repair shops working cars and light trucks through the same bay
• Collision repair shops that need full door clearance at the columns
• Utility fleets keeping work trucks in service

Features

• 10,000 lb capacity — engineered for cars and light trucks
• True symmetric lifting — the vehicle’s center of gravity is spotted directly between the columns, leaving room in front of the columns to open truck and van doors
• 5 HP DC Shockwave power, 110V — battery-driven lifting with an onboard 110V charger, full rise in 25 seconds and descent in 19
• 75 3/4″ – 81 1/4″ rise — measured at the lowest and highest position of the supplied adapters
• Standard 2-stage arms — with exclusive three-position flip-up FA adapters, 31″ to 54″ of reach
• Three width installation options — up to 12″ of extra drive-thru clearance for wide vehicles
• Original Double-S columns — Rotary’s single-piece column shape gives the carriage a secure channel for smooth travel up and down
• ALI Gold Certified — independently certified, with performance testing to 20,000 cycles

Shockwave Power Cuts the Wait

Shockwave is Rotary’s DC battery power system. A 5 HP unit runs off the lift’s own batteries, recharged by an onboard 110V charger, giving twice the lifting speed of a standard-powered lift.

In practice that is a full rise in 25 seconds and a descent in 19, against 45 and 40 on the standard-power SPO10. Across a full day of jobs through one bay, the saved cycles add up.

Symmetric Lifting and Door Clearance

Rotary’s SPO series uses true-symmetric lifting. The vehicle’s center of gravity sits directly between the structure for a smooth, balanced lift, and the door line clears the columns so techs get in and out without dings.

The standard 2-stage arms swing under low vehicles and reach the lift points with three-position flip-up FA adapters, covering 31″ to 54″ of reach front and rear at a minimum adapter height of 5″.

Sized to Your Bay

The SPO10 fits a standard 12′ x 24′ bay and installs at one of three width settings. The base setting gives 11′ 5 5/8″ overall width and 102 1/2″ of drive-thru clearance; the widest setting adds a foot, taking overall width to 12′ 5 5/8″ and drive-thru to 114 1/2″ for wide vehicles.

The Shockwave build stands taller than the standard-power SPO10, so check your ceiling before ordering. Rotary publishes 12′ 4 1/2″ overall height and a 12′ 6″ minimum ceiling height for Shockwave, against 11′ 10 1/2″ and 12′ for standard power.

The Right Two-Post Lift for Your Shop

The SPO10 puts 10,000 lbs of ALI Gold Certified symmetric lifting on proven Double-S columns, with 5 HP Shockwave DC power to halve every cycle. Don’t wait — scroll back up and click the orange Add to Cart button to get this two-post lift on its way to your shop.

Specs

Technical Specifications