Aleko 2-Panel Fence Kit – FLORENCE Style – 8×5 ft.

ALEKO Florence Galvanized Steel Fence Kit — 16 ft. of 2-Panel Residential Fencing

Fencing a front boundary usually means three orders: panels from one place, posts from another, and brackets that turn up last. The run sits half-finished while you wait.

The ALEKO Florence kit covers 16 feet in one box — 2 panels, 2 posts and 12 connector brackets. Welded galvanized steel under a black powder coat, in a Florence pattern with straight lines and minimal detailing.

What’s Included

• 2 Florence fence panels, 8 ft. W x 5 ft. H each (16 ft. total)
• 2 steel posts, 7.5 ft. L x 2.4″ W x 2.4″ H
• 12 connector brackets

Made For

Built for residential boundaries and light commercial frontages where the fence is seen from the street every day.

• Front gardens and street-facing boundaries
• Side and rear property lines
• Homeowners extending an existing run
• Fence contractors on residential jobs
• Courtyards, pools and garden enclosures

Features

• 16 ft. of coverage per kit — panels, posts and brackets arrive together in one order
• Florence panel design — straight lines and minimal detailing that suit a front boundary or a side run
• Galvanized steel construction — zinc under the paint, so a scratch does not start rust
• Black powder-coated finish — resists rust and stops paint chipping outdoors
• 8 ft. wide x 5 ft. tall panels — a residential boundary height that does not need planning drawings
• 7.5 ft. posts for 5 ft. panels — 2.5 ft. of post left to set below grade
• 12 connector brackets included — every fixing needed to hang the panels is in the box
• Pairs with Florence-style gates — the driveway gate and the fence line match

Clean Lines for a Modern Frontage

The Florence panel keeps the vertical run simple and unbroken. Set along a driveway or a front boundary it reads as a deliberate architectural line rather than a decorative feature.

At 108 lb. per panel it is the heaviest of the 2-panel styles, which is weight in the steel rather than in the ornament.

Galvanized Steel Under a Powder Coat

Galvanizing bonds zinc to the steel before any paint goes on. The powder coat then sits over the top as a second barrier, so a scratch in the black finish does not expose bare steel to the weather.

That two-layer build is the difference between a fence that holds its color for years and one that starts blistering along the welds in the second season.

The Right Fence for Your Property

At 16 feet per kit, the Florence closes a typical front or side boundary in a single order. Panels bolt to the posts with the included brackets, so a two-person crew can lay the run out without a hardware run mid-job.

Assembly is required, and the 7.5 ft. posts leave 2.5 ft. to set below grade for a rigid line. Longer runs combine kits end to end on the same bracket pattern, and Florence-style gates are available to match.

Don’t wait — scroll back up and click the orange Add to Cart button to get this fence kit on its way to your property.

Specs

Technical Specifications