HD Ramps 6′ x 14″ Hook-End Equipment Ramps 12,000 lb per Axle Capacity
$755.99
HD Ramps 6′ Hook-End Equipment Loading Ramps
Loading a skid steer, tractor, or trencher onto a trailer shouldn’t be a hassle. Slippery surfaces, ramps that kick out under load, and bulky steel attachments slow you down, increase risk, and make every loading job harder than it needs to be.
The HD Ramps 6′ Hook-End Equipment Ramps solve this with American-made aluminum construction, a 12,000 lb per axle capacity, a secure hook-end attachment, and serrated cross-rung traction — delivering a stable, professional-grade loading solution built for heavy equipment and demanding job sites.
The System
Everything you need to safely load your equipment and get on the road.
- Two aluminum hook-end loading ramps
- Secure hook attaching end for trailer rub rails
- Serrated cross-bar rung loading surface
- Sold as a pair — complete, ready-to-use solution
Made For:
Designed for contractors, landscapers, farmers, and equipment haulers, these hook-end ramps are built to handle the demands of daily loading on construction sites, farms, and rental yards with confidence and stability.
Their heavy-duty capacity and versatile hook-end design make them well-suited for a wide range of rubber-wheeled equipment, from skid steers and compact tractors to trenchers, loaders, and small commercial machinery.
Best For:
- Skid steers and compact track loaders (rubber-wheeled)
- Compact tractors and utility tractors
- Trenchers, loaders, and backhoes
- Landscaping and construction equipment
- Open trailers with angle iron or rub rails
Features:
- Made in the USA — high-strength aluminum
- 12,000 lbs per axle — 24,000 lbs GVW
- Designed for 12″ to 20″ trailer heights
- 72″ length for a gradual loading angle
- 14″ wide surface for equipment tires
- Hook-end secures to angle iron or rub rails
- Serrated rungs for non-slip traction
- Lightweight 42 lbs per ramp for easy setup
- Stub-toe foot for maximum stability
- Sold in pairs — ready right out of the box
Heavy-Duty Capacity, Lightweight Design
Loading heavy equipment doesn’t have to mean wrestling with cumbersome steel ramps. At 42 lbs per ramp, these hook-end ramps are built light enough for one person to position without assistance — but engineered to support the axle loads that skid steers, tractors, and compact loaders actually put down.
High-strength aluminum delivers that strength-to-weight ratio without sacrificing the durability your operation depends on. Hook them on, drive your equipment up, and get back to work — without needing extra hands just to set up your loading gear.
Hooks That Hold
Once your ramps are hooked onto your trailer, the secure hook-end design takes over. There’s no extra strapping step, no improvised bracing, and no second-guessing whether your ramps will kick out before you drive your equipment up.
This is a detail that matters when you’re loading a 12,000 lb skid steer or tractor — and it’s built directly into every set of HD Ramps hook-end ramps from the ground up.
Traction You Can Count On
The extra-wide serrated cross-bar rung surface grips your tires on the way up and keeps them planted while driving onto the trailer. Whether you’re loading in a dry yard or out in the field where mud and rain are part of the job, the ramp surface is built to perform reliably and consistently.
Combined with the secure hook-end attachment, the serrated traction surface means your equipment goes exactly where you want it for the full duration of the loading process.
Ready to Work as Hard as You Do?
Every loading job you push through without the right equipment costs you time, adds unnecessary risk, and puts more wear on your gear. The HD Ramps 6′ Hook-End Equipment Ramps are the professional solution your operation deserves — American-made, heavy-duty rated, and purpose-built for the equipment you actually haul.
Stop working around equipment that wasn’t designed for the job. Click the Add to Cart button now and put a proven, purpose-built loading ramp solution to work on your trailer today.
Specs
Specifications
| Length | 6′ |
| Width | 14″ |
| Height | 4″ |
| Maximum Capacity | 12,000 lbs. per axle |
| Weight | 42 lbs. each |
| Minimum Height | 12″ |
| Maximum Height | 20″ |
| Material | Aluminum |
| Foot Type | Stub |
| Attaching End | Hook |
Related products
Atlas 12AWFSL 12k Wheels-Free Alignment Scissor Lift + 2x RJ-6 Rolling Jacks Combo
In stock
Guardian 3′ x 3′ Aluminum Curb Ramp High-Strength with 750 lbs Capacity
In stock
Guardian Punch Plate Aluminum Shed Ramp 29″ L x 24″ W x 2″ H
In stock
HD Ramps 10′ L x 16″ W Aluminum Hook End Car Trailer Ramps 5,000 lb. Per Axle Capacity
In stock
HD Ramps 10′ x 26″ Plate End Aluminum Punch Plate Walk Ramp 1,750 lbs Capacity
In stock
HD Ramps 10′ x 40-1/2″ Plate-End Aluminum Walk Ramp 2,000 lbs Capacity
In stock
HD Ramps Aluminum Hook-End Ramps 14’x16″ with 12,000 lbs Capacity
In stock
Rotary SPO12 Shockwave 2-Post Lift 12,000 lb. Capacity
In stock
Reviews
Clear filtersThere are no reviews yet.