KATOOL KT-H120D 2-Post Car Lift 12,000 lb Capacity, Symmetric Arms, Single Lock Release

Katool KT-H120D 12,000 lb Symmetric Two Post Car Lift

Trucks and vans carry their weight evenly — and lifting them off-balance is how arms get overloaded and vehicles get dropped.

The Katool KT-H120D two post car lift takes the even-load approach: symmetric arms centered on the columns, 12,000 lbs of capacity, and a single-point lock release for quick, controlled cycles.

Why Choose the KT-H120D

The KT-H120D pairs a heavy 12,000 lb rating with symmetric geometry — the setup that keeps balanced loads balanced.

• 12,000 lb capacity — full-size trucks, vans, and loaded work vehicles.
• Symmetric arms — the vehicle centers between the columns with weight split evenly across all four pads.
• Single-point lock release — every safety lock disengages from one location.
• Dual-locking safety with cable equalization — plus automatic shut-off and multiple mechanical lock positions.

Made For

Built for bays where trucks and vans are the standard workload.

• Truck and fleet service bays
• Independent shops lifting heavier vehicles daily
• Serious home mechanics with pickups and SUVs
• Van upfitters and undercoating work
• General repair bays wanting one lift for everything

Features

• 12,000 lb capacity — trucks, vans, and heavy SUVs
• Symmetric arm configuration — balanced, centered lifting
• Single-point lock release — one location controls all locks
• Approx. 72–74 in lifting height — stand-up working clearance
• Approx. 4.5 in min pad height — low-profile arm entry
• Dual hydraulic cylinders — synchronized lifting side to side
• Cable equalization with automatic shut-off — level travel, protected top of stroke
• Multiple mechanical lock positions — steel under the load at any working height

Symmetric Lifting for Heavy, Balanced Loads

With symmetric arms, the vehicle’s center of mass sits between the columns and each arm takes an even share. On heavy trucks and vans that translates to stable, predictable lifts every time.

The clear-floor layout keeps the space under the vehicle open at approx. 111 in of overall height — working room without an extreme ceiling requirement.

Locks First, Lowering Second

Mechanical locks engage at multiple positions as the lift rises, and cable equalization keeps both carriages moving together. The load rests on steel, not hydraulic pressure, whenever you are under it.

The single-point release disengages all locks from one spot, and the automatic shut-off stops travel at the top of the stroke. Dual hydraulic cylinders drive the carriages directly.

The Right Two Post Lift for Your Shop

For steady, balanced lifting of heavy vehicles, the KT-H120D keeps it simple: 12,000 lbs, symmetric arms, and one release point.

Don’t wait — scroll back up and click the orange Add to Cart button to get this lift on its way to your shop.

Specs

Technical Specifications

Manual

Owner’s Manual

Download the Katool KT-H120D owner’s manual for installation instructions, maintenance guidelines, and safety information. Download Manual